Quality control - supervisor, quality control
hoy
chromalloy is a global engineering & solutions company. We are a leading provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world.
duties and responsibilities:
1. supervise qc personnel assigned to value streams, ndt inspectors, and certifying staff.
2. organize qc inspection resources to support the achievement of csw on-time delivery and turn-around time goals.
3. oversee inspectors’ activities to ensure all inspections are performed in accordance with engine manual and customer requirements.
4. coordinate and maintain inspection personnel competence, and the use and recall of inspection gages.
5. drive the recording, and handling of quality records in accordance with quality system requirements, and monitor the correct transactions made by inspectors in erp system (syteline).
6. facilitate training to inspection personnel on new and updated quality system documentation and engineering approved data.
7. perform dakota safety audits.
8. control of quality control and fpi inspection tools.
9. certain other activities or responsibilities inherent to the position.
requirements:
* b.s. Industrial engineering or equivalent degree.
* minimum 4 years of experience in similar position. Experience in aerospace industry preferred.
* bilingual. Spanish and english (90% conversational and written).
* knowledge: computer skills using ms office (word and excel), and familiar with transactions in erp system.
* valid us visa.
* willingness to travel
materials quality control engineer
hoy
job description:
are you ready to make it happen at mondelēz international?
join our mission to lead the future of snacking. Make it with pride.
you lead the plan-do-check-act (pdca) process of the site quality management system and report results to the quality section manager.
how you will contribute
you will support elements of the site’s quality system, including internal documentation and change management control including quality policies amendments and registration of internal and external documentation, internal audits, effective pdca cycles and capa system management and management review. In addition, you will coordinate the eqcms bi-annual review, handle consumer complaints from start to finish, and serve as a key contact for food regulatory agency inspection and contacts management.
what you will bring
* relevant experience in a laboratory.
* working efficiently on a team
* flexibility and adaptability to meet customer/business requirements
* attending to detail and following written instructions
* communicating effectively, verbally and in writing
* project management and working on multiple activities at the same time
más información sobre este puesto
qué debes saber acerca de esta posición
* responsable de la gestión de materiales y calidad
* soporte a excepciones de material
* atención a proveedores
* auditorias finanzas
educación/ titulaciones
* licenciatura en calidad, ingeniería industrial o mecánica
requisitos específicos del puesto
* conocimiento en sap
* conocimiento en funcionamiento de maquinaria
* excel intermedio avanzado
* deseable power bi
* manejo de kronos
* deseable conocimiento en fssc
requisitos asociados con el puesto de trabajo
* analítico
* liderazgo
* destacado
* servicio al cliente
* proactivo
horario laboral: tiempo completo l-v
no relocation support available
business unit summary
mondelez méxico has been in the country since 1927 and currently employs 6,000 wonderful people. Our diverse portfolio includes iconic and mouth-watering global brands such as trident, oreo, philadelphia, and local jewels like clorets and bubbaloo. We are leaders in the making of cream cheese, powdered beverages and confections. Mondelez international is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation or preference, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law.
job type: regular
supply chain quality assurance
product quality, safety and compliance
sr quality control supervisor
hoy
innovate to solve the world\'s most important challenges:
lead a team of quality engineers at mexicali that applies its expertise and knowledge in finding innovative, cost-effective means to improve quality output and continuous improvements working with operations, engineering, operations ame and sourcing. You will lead the strategic direction and initiatives that ensures compliance with customer requirements, regulatory agencies, government regulations and engineering specifications while instilling site accountability for governance of the quality system, product acceptance and, product quality.
key responsibilities:
* people management
* brainstorm solutions
* lead improvement teams
* risk analysis
* coordinate resolution
* customer consulting
* project planning
* mentor technicians
* cost improvement analysis
* drive technical solutions
you must have:
* bachelors degree in mechanical engineering or industrial engineering.
* fluent english.
* available to work in the site 5 days a week.
* previous experience with people management.
* previous experience in quality control area.
* availability to live in baja california.
we value:
* manufacturing experience in a fast paced environment
* ability to collaborate effectively with internal/external customers
* excellent interpersonal and communication skills
* able to influence changes that positively impact production
* some experience of leading technical teams
* knowledge of quality assurance standards
* experience implementing quality management systems
* six sigma greenbelt desired
additional information:
* job id: hrd
* category: integrated supply chain
* location: circuito aerospacial no. 2, mexicali, baja california, 21395, mexico
* exempt
quality control supervisor (product release)
hoy
descripción y detalle de las actividades
oversee daily activities for product release associates. Plan daily activities for product release team and coordinate workload to ensure appropriate manpower is assigned to required activities. Verify product release tasks are well-defined, product release team is productive and processes are compliant to isi operating procedures and instructions. Ensure training is appropriate and timely for dhr associates. Review and approve timecard submissions and related requests. Verify manpower planning is aligned to internal customer demand, current and projected. Review individual contributors’ performance and mentors as appropriate to continuously improve product release performance.
experiencia y requisitos
- experience in personnel supervision - 2-5 years preferred - experience in product inspection and/or release activities against written procedures or specifications - preferred. - experience in monitoring metrics and establishing actions for improving. - experience in training personnel. Preferred. - experience in creating and managing reports. - experience in control of non-conforming material. Desired - experience in improvement projects - desired. Skills, experience, education, & training: - bs in engineering (in progress is accepted) - highly experience in sap, agile preferred - requires understanding of erp information systems, preferably sap. - must be proficient in the microsoft office suite of programs, specifically excel. - proficient in english (spoken and written)
organización
intuitive surgical, s. de r.l de c.v.
correo de contacto
giro
maquiladora (export.)
actividad principal
productos médicos para cirugía.
número de empleados
1500
/registro area calidad
contrato permanente
turno nocturno
jornada tiempo completo
horario jornada de 12 hrs
estudios carrera profesional
inglés hablado: 80%, escrito: 80%
sexo indistinto
lean manufacturing coordinator
hoy
descripción y detalle de las actividades
* participates in creating lean deployment plans.
* creates, maintains and improve lean documentation (process map, procedures, forms,etc)
* communicates progress.
* links projects to sqdpc initiatives.
* evaluate improvement initiatives against quantifiable kpi’s to measure effectiveness, taking action when necessary.
* assist with, facilitate or lead kaizen and continuous improvement events.
* assist with event planning, tracking, and monitoring.
* along with lean technician, ensures that plant layout is maintained and aligned with current needs & future projects.
* increase fod awareness and control across the organization.
* train the trainer approach.
* drives for perfection towards stretch targets.
* maintains open line of communication.
* coaches and mentor operations and functional leaders in regard to implementation of lean tools and lean management systems, through gemba walks on shop floor.
* drives continuous improvement across the plant, through processes like quick&easy kaizen and recognition systems.
* gather and document knowledge sharing, including best practices & lessons learned, to integrate into the company’s.
* actively participates in communication.
* provide training on lean tools and principles to employees, as necessary.
experiencia y requisitos
* lean/six sigma methodologies - minimum 5 years of experience in manufacturing environments.
* experience in diverse functions (such as engineering, materials, operations or quality) is a plus.
* certified as green belt (strongly preferred).
* advanced excel - autocad or similar
* fast learner
* english 90%
* aerospace industry or sheet metal forming manufacturing plants experience (strongly preferred)
* complies with all company policies, behaviors, procedures and safety standards
* well organized to manage multiple competing priorities in parallel.
* team member and to be able to influence in corporate initiatives decision.
organización
lmi aerospace
giro
manufacturera
actividad principal
fabricates, machines, finishes, kits and assembles machined and formed close tolerance aluminum.
número de empleados
300
área
operaciones
contrato
permanente
turno
diurno
jornada
tiempo completo
horario
l-v 6:30-4:10 pm
estudios
carrera profesional
sexo
indistinto
edad
18 - 65 años
#j-18808-ljbffr